Presto rust solvent reduces abrasion and allows easy disassembly of seized fixtures and rusted together parts. The product works quickly and efficiently and flows or wicks of its own accord, that is against gravity. Enrichment with molybdenum sulphide improves its lubrication. Metal, rubber and many plastics are not effected by Presto rust solvent. Typical uses: bolted joints, locks, studs, nuts, tool, chains etc. Contents: 400 ml. This product cannot be sold to people under the age of 18. Dangerous Substances Directive in accordance with CLP-Regulation (EC) No. 1272/2008 and its various adaptations. Hazard pictogram: GHS02. Signal word: danger. Hazard warnings: H222-H229 highly inflammable aerosol. Vessel under pressure, can burst if heated. H412 damaging for aquatic organisms with long lasting effects. Safety warning: P102 may not be used by children. P210 keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking. P211 do not spray into naked flames or other sources of ignition. P251 do not pierce or burn, even after can is empty. P260 avoid inhaling the aerosol. P410+P412 keep out of direct sunlight, do not expose to temperatures over 50°C. P501 dispose of the contents/ container according to the local requirements. Additional advice: EUH066 repeated contact can lead to weakened skin. Relevant sections: H220 highly inflammable gas, H225 liquid and vapour easily inflammable, H280 contains gas under pressure; can explode during heating. H336 can cause drowsiness and dizziness. H411 poisonous to aquatic life with long lasting effects. R12 extremely inflammable. R51/53 toxic for aquatic life, can have long lasting damaging effects in waters. R65 damaging to health: can cause lung damage if ingested. R66 repeated contact can lead to skin damage. R67 vapours can cause dizziness and drowsiness. Please see UK safety standards for use of chemicals.