Scooter piston
Shipping to:
Währung:
Language: Deutsch English French Swedish
0 Products | 0,00 EUR |  CHECKOUT
SELECT YOUR VEHICLE  ❯❯
we ship worldwide
shipping to  US ? ask customer care
we ship today if you order within 5 hours 43 minutes ²
Shop by Brand
NEWSLETTER
Once a month news from the Scooter World plus a 10€ welcome voucher?
SUBSCRIBE HERE

Scooter piston

Scooter piston

During the working cycle of an internal combustion engine, the energy bound in the fuel in the cylinder is converted into heat and pressure in a very short time. This process takes place explosively so that the temperature and pressure values in the cylinder rise very sharply in fractions of a second. In mechanical engineering, a piston is a movable component of the combustion chamber which, together with the cylinder, forms a closed cavity. The piston is responsible for sealing the combustion chamber. In addition, the piston performs other important tasks. It closes off the combustion chamber, dissipates the heat generated in the combustion chamber, supports charge change and mixture formation by means of a special shape of the piston surface on the combustion chamber side. The piston is a hollow cylinder closed on one side in its basic structure, consisting of the following areas: piston hub, shaft and piston crown with ring section. Today, pistonfor reciprocating piston engines are mainly made of cast aluminium alloys. The blank is produced by gravity die casting.

piston force

The piston is exposed to a wide variety of forces as it moves up and down continuously in the cylinder while the engine is running. At the respective reversal point it is strongly braked and then accelerated again. This creates mass inertia forces which act on the piston. Together with the forces generated by the gas pressure, they form the piston force. The piston force is transmitted to the connecting rod and the crankshaft. However, the connecting rod is only exactly vertical at the upper and lower reversal points (also called dead centre). Due to the inclined position of the connecting rod, the piston is pressed against the cylinder wall. During a working cycle, the level of this force changes direction several times and is dependent on the piston force and the angle at which the piston crown and connecting rod axis are in relation to each other. The lateral force can also be derived from the parallel force program.

Each piston is equipped with piston rings. The piston ring is a sealing element on the piston. Its task is to seal the working chamber, to dissipate the heat of combustion from the piston to the cooled cylinder wall and to dose the lubricating oil between the running surface of the ring and the cylinder wall.

piston stroke

The piston stroke is the maximum distance a piston can travel in one direction within a cylinder. In the piston engine, the piston stroke is the distance travelled by the piston from the upper reversal point of its up and down motion to the lower dead center. The distance is determined by the crank radius of the crankshaft.
MY ACCOUNT
eMail:
Password:
 
Zahlarten
INTERNATIONAL
FOLLOW US
facebook vimeo instagram youtube snapchat

geprüfter Shop IT-Recht-Kanzlei Datenschutz Codex Comodo
All prices are including VAT plus Shipping Costs depend on company providing service, price and weight and possible costs for cash on delivery. Catalogue English Sitemap
® All brand names, trademarks and registered trademarks are property of their rightful owners and are used only for description. OEM numbers are for comparison purpose only.
¹ Please note our ">additional terms for partial revocation. ² True for orders including items marked with "Ready for Shipment: 24 Hours", not valid for orders with payment "bank transfer".
© Racing Planet Vertrieb GmbH 2019


* plus shipping