Cold-galvanizing agent for greater corrosion protection. Outstanding protection for all ferrous metals used on scooter frames, exhaust systems, mechanical parts, metal housings etc. Especially effective on welded seams and high-corrosion metal areas. Use Presto Zinc-Aluminium Spray for colour-true paint matching. Characteristics: highly effective zinc coating with over 90% zinc dust in a dry film cathodic protection for all bare metals. Resistant to even the heaviest corrosion. Temperature resistant to up to 600 degrees Celsius and particularly well suited for use on welds and exposed, high-rust areas. Chemical components: Thickener: epoxy; colour: zinc coloured; smell: solvent; Gloss level: DIN67530 compliant matt at 60 degree angle; 5GE effectiveness: dependent on make-up and colour of base coat - 400ml covers 1 - 1.5 meters; cover coat drying time (at 20 degrees C, 50% relative humidity): touch-dry after approx. 10 minutes, non-tacky after 20 mins and paintable after approx. 24 hours. Temperature resistant after just 8-12 hours. Drying time depends on ambient temperature, humidity and the thickness of application. Temperature resistant: up to 600 degrees C; Longevity/Shelf life: 10 years if stored properly (10-25 degrees C, relative humidity of max. 60%); Container/contents: aerosol can with max. capacity of 150ml - item may only be sold to persons over 18 years old. Dangerous Substances Directive in accordance with CLP-Regulation (EG) No. 1272/2008 and its various adaptations; Warning pictograms: GHS02 GHS07 GHS09; Signal word: danger; Dangerous components to be labelled: acetone, butanone; Hazard warning: H222-H229 extremely flammable aerosol. Contents under pressure. Can explode when exposed to heat. H319 causes extreme eye irritation. H336 kann cause tiredness and drowsiness. H410 Very toxic to aquatic organisms - long lasting effects; Safety warning: P101 requires medical intervention - retain packaging or labelling for inspection; P102 Keep away from children; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray onto an open flame or other ignition sources. P251 Do not pierce or burn, even after use. P260 do not breathe in aerosol. P410 + P412 Keep out of direct sunlight. Do not expose to temperatures over 50 degrees Celsius. P501 Dispose of container / contents in accordance with regional guidelines. Additional information: EUH066 Repeated exposure can lead to dry or cracked skin. Explosive mixture possible without effective ventilation. Relevant clause: H220 Extremely flammable gas. H225 contents and its vapour highly flammable. H226 Contents and vapour flammable. H260 Contains pressurized gas - can explode under pressure. H304 May cause death through digestion or internal exposure. H312 Health hazard upon skin contact. H315 Causes skin irritation. H319 Causes serious eye irritation. H332 Dangerous if inhaled. H335 May irritate airways. H336 May cause tiredness and drowsiness. H400 Highly toxic to water organisms. H410 Highly toxic to water organisms - long lasting effect. H411 Toxic to water organisms - long lasting effect. R10 Flammable. R11 Easily flammable. R12 Highly flammable. R20 Hazardous to health when breathed in or upon contact with skin. R36 Irritates eyes. R37 Irritates breathing organs. R38 Irritates skin. R41 Danger of serious damage to eyes. R50/53 Very toxic to water organisms, may have long-lasting damaging effects. R65 Hazardous to health: if inhaled, may cause damage to lungs. R66 Repeated exposure may lead to cracked or damaged skin. R67 vapours may cause tiredness or drowsiness. Please see UK safety standards for use of chemicals.