BGM PRO TOURING 2.0 Electronics 1600g
Shipping to:
Währung:
Language: Deutsch English French Swedish Schweiz
0 Products | 0,00 EUR |  CHECKOUT
SELECT YOUR VEHICLE  ❯❯
we ship worldwide
shipping to  US  from 34,40 EUR
256 bit ssl-encryption • PCI DSS compliant • express shipping
PARTS AND ACCESSORIES
Shop by Brand

flywheel BGM PRO TOURING 2.0 electronics 1600g, large cone (20 / 24) for Vespa Classic PK 50 V5X1T

Item No:
50332
125,21 EUR
prices incl. 0% sales tax, free shipping in GER
gross weight: 1,65 kg

BGM Pro TOURING 2.0 Electronic - for conversion to fully electronic CDI ignition.

The BGM PRO Pole Wheel is a very high quality reproduction of the no longer available original Piaggio PK Pole Wheel.
We have invested in brand new moulds and can now offer the sought after conversion pole wheels in fantastic quality at a very fair price.

FEATURES

  • Weight Smallframe 1600 gram (V50, PV, ET3, PK - orig. up to 2800Gramm)

  • Weight Largeframe 2300 gram (Sprint, PX, LML, Cosa - orig. up to 3200 gram)

  • High ignition timing accuracy

  • Very good concentricity

  • Balanced ex works

  • Good magnetization

  • Higher performance due to optimized wing surface

The weight of the pole wheels is adapted to the respective application:
The Smallframemodels with 1600 grams are perfectly suited for the lively characteristics of the small motors.
The Largeframemotors with 2300 grams offer a wonderful mixture of a lot of running culture and very good acceleration.

Basically the pole wheels always need a 12V ignition base plate/alternator. This means that any formerly contact-controlled engine can be converted to a fully electronic CDI ignition including voltage-controlled on-board electrics. We offer complete sets with all parts needed for the conversion (see alternatives/accessories).

Available in four versions:

  • BGM8025RT: Vespa Largeframe 2300g, large cone, M12 (1978-) - PX, Cosa, LML 125/150 (2-stroke)
    For the conversion of all Largeframe engines which already have the large cone (pole wheel thread M12, width across flats 18), but still have a contact-controlled ignition (approx. 1978-1981, PX, Sprint Veloce, GTR, Super, TS). Here you need the pole wheel and a new 12V ignition base plate. For later models (e.g. Vespa PX from approx. 1982, Cosa, LML) with factory installed electronic ignition, this can be further used. Here you benefit from a conversion to the BGM pole wheel from a much livelier engine characteristic with noticeably improved acceleration as well as a higher engine performance.

  • BGM8032RT: Vespa Largeframe 2300g, small cone, M11 (1957-1977) - Sprint, GT, GTR, Super, GL, VNA, VBA, VNB, VBB, Motovespa 125/150 S/N/L
    The most classic of all large frame engines. Still has the old type crankshaft with a thin (pointed) cone which is recognizable from the outside by the pole wheel nut with M11 thread and spanner size 14.
    These engines always have a contact ignition ex works.
    Here a modern vehicle electrics is created by the conversion of pole wheel, ignition and vehicle wiring harness which is absolutely maintenance-free and contains a strong 12V generator which provides for fantastically bright light. Starting on the first kick included.

  • BGM8033RT: Vespa Smallframe 1600g, small cone, M10 - V50, 50N, Special, SR50, Sprinter, SS50, SS90, V90, 90 Racer, V100, ET3, PV, PK S
    Suitable for all smallframe engines with small cone (pole nut M10, SW14 or SW16). These engines always have a contact ignition ex works (exception ET3/PK).
    Here, by converting the pole wheel, ignition and vehicle wiring harness, a modern vehicle electrical system is created that is absolutely maintenance-free and includes a powerful 12V alternator that provides fantastically bright light. Starting on the first kick included. PK models that already have a voltage regulator do not require a new wiring harness.

  • BGM8034RT: Vespa Smallframe 1600g, big cone, M12 - PK XL/XL2, PK FL2, PK HP, PK125 ETS, Motovespa PK75 XL (96M/104M), PK75 FL (127M/128M)
    For smallframe engines that already have the large cone (pole wheel thread M12, width across flats 18).
    Replaces the original (no longer available) pole wheel 1:1. Here you profit with a conversion to the BGM pole wheel from a much livelier engine characteristic with noticeably improved acceleration.
    It is also very popular on the older engines (with originally small cone) used when these were converted to the more stable crankshafts of the Vespa PK XL or ETS.

AI-translation

Item No:
50332
EAN/UPC:
4251389126126
Shipping:
2-7 days
Manufacturer:
BGM PRO
gross weight:
1,65 kg
There are no customer reviews yet.

In order to best respond to your inquiry, please provide us with information about your vehicle, such as brand, name, registration date, serial number and model code. These information can be found in your vehicle registration certificate.

Enquiry:
* Your email adress will solely be used for the handling of your contact request. All information on the handling of you personal data can be found in our privacy policy.
Customers who purchased this product also purchased
MY ACCOUNT
eMail:
Password:
 
Zahlarten
INTERNATIONAL
FOLLOW US
facebook vimeo instagram youtube snapchat

geprüfter Shop IT-Recht-Kanzlei Datenschutz Codex Comodo
All prices are including VAT plus Shipping Costs depend on company providing service, price and weight and possible costs for cash on delivery. Catalogue English Sitemap
® All brand names, trademarks and registered trademarks are property of their rightful owners and are used only for description. OEM numbers are for comparison purpose only.
¹ Please note our ">additional terms for partial revocation. ² True for orders including items marked with "Ready for Shipment: 24 Hours", not valid for orders with payment "bank transfer".
© Racing Planet Vertrieb GmbH 2019


* plus shipping